MS_HW_DISKENCLOSURE

 Home  Previous  Next

Icon

mshw_enclosure_ok_32

Parameters

Parameter

Description

Unit

Default Alert Thresholds

Type

IntrusionStatus

This parameter will trigger an alarm if the enclosure is open or not properly closed.

Value set by enclosureColl every 2 minutes.

{0 = OK ; 2 = Intrusion Detected}

1 = Warning
2 = Alarm

Availability

Missing

When the disk enclosure is no longer discovered, the parameter goes into alarm.

{0 = Present ; 1 = Missing}

1 = Alarm (*)

Availability

Status

Enclosure Status.

Value set by enclosureColl every 2 minutes.

{0 = OK; 1 = Degraded; 2 = Failed}

1 = Warning
2 = Alarm

Availability
(*)These thresholds are automatically set by Hardware Sentry KM according to your environment and the recommendation of the system manufacturer during each discovery (by default, every hour). To customize these thresholds and prevent Hardware Sentry KM from overwriting your settings, you will need to use the “Modify Thresholds” KM Command.
It is not recommended to modify these thresholds.
NoteDepending on your system, all parameters may not be used. Only one of the parameters may be visible. This will not affect the proper monitoring of the device.

InfoBox

Name

Description

PATROL ID

PATROL internal identifier for the enclosure/chassis. This ID is used for PATROL event reporting etc.

Enclosure Information

Heading preceding fields with information on the monitored device

Manufacturer

Name of the enclosure/chassis manufacturer

Model

Enclosure model details

Type

Details about the type of enclosure/chassis

Serial Number

Serial number of the enclosure/chassis

BIOS Version

BIOS version details

Device ID

ID of the monitored object as communicated by the instrumentation layer

Connector Information

Heading preceding fields with information on the connector used to monitor the device

Connector Display Name

Displays name of the connector currently used to monitor the enclosure/chassis

Connector ID

PATROL ID of the connector used to monitor the enclosure/chassis

Connector File Name

File name of the connector currently used to monitor the enclosure/chassis

Connector Version

Version details of the connector

Connector Date

Connector build date

Menu Commands

Function

Description

Instant Hardware Health Report

Displays a text box recapitulating miscellaneous information regarding the monitored device (properties of the object, its parameters, thresholds, etc.)

Modify Alert Thresholds

Allows you to modify the thresholds of the IntrusionStatus and Status parameters

Pause Monitoring

Pauses the device monitoring

Resume Monitoring

Resumes the device monitoring after it has been paused

Remove

Removes the device object from monitoring

Refresh Parameters

Refreshes all instance parameters of the application class.

 

See Also

Intrusion Detection Alerts